RB26 Heater Tube Kit

Does not work with factory water oil heat transfer unit on the block

RB26 Heat Tube Kit

1x Steel Zinc Plated Press fitting, This is to be fitted into thermostat housing ( The original 90 degree fitting must be removed )

1x 19mm Hose

2x Hose Clamps

1x Barb Fitting which suits the heater tube outlet end size.

1x M6 Vibration Damper to be fitted to rear of RB26 Block

2x M6 Flange Nuts

R32 have 16mm heater hoses

r33 & R34 Have 19mm heater hoses