RB26 45mm OEM Throttle Rebuild
- OEM 45mm Throttle Rebuild
- Strip Down & Reassemble
- Dry Blast & Finish With Wet Blast
- 6x New Bearings
- 6x New Seals
- 6x New Plastic Spring Guides & Springs
- 12x New Fasteners
- All Hardware Dry Blasted & Plated
- Replace Vacum Nipple On Cylinder 1 & 2 Throttle
- Re Seal Blades To Bore Using Throttle Coat
RB26 Throttle Linkage Bridge Rebuild
- Linkage Bridge Overhaul
- Strip Down & Reassemble
- Dry Blast & Finish With Wet Blast
- 2x New Bearings
- 2x New Plastic Spring Guides
- 2x SS316 Tension Pins
- 1x New SS316 Linkage Shaft ( Old Rust Shaft Is replaced )
- All Hardware Dry Blasted & Plated
RB26 Throttle Linkages Rebuilt ( Free When Throttle & Linkage Bridge Rebuild is Purchased )
- Strip all 3 linkages
- Dry Blast & Have parts plated
- Clean up all threads
- Reasembly Linkages ( Installed to finely adjust when re installing throttle system )
Additional Info
- Tourqed to spec with High Strength Loctite
- Lightly Re-Sealed with Throttle Coat
- For Exchange Please view this file before shipping & during install
45mm RB26 Throttle System Rebuild Service
$0.00Price
Excluding GST
IEE Restored RB26 Throttles Are Only Shipped Out Once The Customers Exchange Throttles Arrived At IEE NZ, Once arrived we will thoroughly inspect the exchange units are up to standard and there is no visible damage, if there is any damage we will cancel exchange and proceed to rebuild the core unit which is sent it. this will in turn cause a 4 -8 week delay depending on stock levels of plated hardware.
to ensure a quick turn around be sure to thoroughly inspect your throttles for any chips, dents, deep grooves or scratches, broken tabs, damaged thread etc etc