48mm RB26 Throttle System Oversize & Rebuild
Strip Down
Steam Clean Housings
Dry Blast Housings
Vapor Blast Housings For Shine Finish
All Hardware Plated
Vacum Nipple Replaced With Barbed unit
3x Brand New Throttle Shafts To Suit 48mm Bore, Shaft Cutouts For Improved Air Flow & Decreased Turbulence @ Shaft / Blade
6x CNC Machined Bores 45mm to 48mm ID
12x CNC Machined O Ring Grooves
12x O Rings
6x CNC Machined 48mm Throttle Blades
6x New Throttle Shaft Bearings
6x New Throttle Shaft Seals
6x New Spring Guides
3x New Springs
12x New Fasteners
Reassembly
Alignment & Centreing of Blades
Set Throttle Back Stops
Fit & Tourqe New Throttle Shaft Bolts
Re Seal Blades To Bore Using Tomei Throttle Coat
RB26 Throttle Linkage Bridge Rebuild
- Linkage Bridge Overhaul
- Strip Down & Reassemble
- Dry Blast & Finish With Wet Blast
- 2x New Bearings
- 2x New Plastic Spring Guides
- 2x SS316 Tension Pins
- 1x New SS316 Linkage Shaft ( Old Rust Shaft Is replaced )
- All Hardware Dry Blasted & Plated
RB26 Throttle Linkages Rebuilt ( Free When Throttle & Linkage Bridge Rebuild is Purchased )
- Strip all 3 linkages
- Dry Blast & Have parts plated
- Clean up all threads
- Reasembly Linkages ( Installed to finely adjust when re installing throttle system )
Additional Info
- Tourqed to spec with High Strength Loctite
- Lightly Re-Sealed with Throttle Coat
- For Exchange Please view this file before shipping & during install
48mm RB26 Throttle System Oversize & Rebuild
IEE Restored RB26 Throttles Are Only Shipped Out Once The Customers Exchange Throttles Arrived At IEE NZ, Once arrived we will thoroughly inspect the exchange units are up to standard and there is no visible damage, if there is any damage we will cancel exchange and proceed to rebuild the core unit which is sent it. this will in turn cause a 4 -8 week delay depending on stock levels of plated hardware.
to ensure a quick turn around be sure to thoroughly inspect your throttles for any chips, dents, deep grooves or scratches, broken tabs, damaged thread etc etc