RB26 ITB 45mm Throttle Restore / Exchange Basis
🔄 This product is part of our RB26 Exchange Programme.
Send your cores to us first and pay no core charge, or order up front with a refundable NZ$500 core charge.
Full exchange terms, lead times & core condition requirements →
45mm Throttle Rebuild
Strip Down & Inspect all 3x Throttle Bodies
Dry Blast & Finish With Wet Blast
6x New Bearings
6x New Seals
6x New Plastic Spring Guides & Springs
12x New throttle blade fasteners
All Hardware Dry Blasted & Plated
Replace Vacuum Nipple On Cylinder 1 & 2 Throttle
Re Seal Blades To Bore Using Throttle Coat
Additional Info
Throttle blade to shaft fasteners are torqued to spec with medium Strength Loctite
Lightly Re-Sealed with Throttle Coat
Surface Finish — choose your finish when adding to cart.
All components are delivered wet-blasted (shiny finish) as standard, at no extra cost.
After clicking Add to Cart, you’ll be presented with the available finish options before the item is placed in your cart:
- Wet-Blasted — included as standard
- MIPA CA 2K Clear Coat - a durable 2K clear over the blasted finish. Search "MIPA CA 2K" for the product datasheet.
- Cerakote Elite Series — premium ceramic coating in Blackout (E-100), Carbon Grey (E-240), Titanium (E-250), or a custom colour (email us first for custom colours).
Want a different Elite colour? Select Custom Colour - Email First. Additional cost (colour + freight from our USA supplier, $120 minimum) and extended lead time apply. Please email us before checking out.