RB26 Throttle Bodies OEM Configuration Rebuild / Exchange Basis
45mm Throttle Rebuild
Strip Down & Inspect all parts
Dry Blast & Finish With Wet Blast
6x New Bearings
6x New Seals
6x New Plastic Spring Guides & Springs
12x New throttle blade fasteners
All Hardware Dry Blasted & Plated
Replace Vacuum Nipple On Cylinder 1 & 2 Throttle
Re Seal Blades To Bore Using Throttle Coat
Additional Info
Throttle blade to shaft fasteners are torqued to spec with medium Strength Loctite
Lightly Re-Sealed with Throttle Coat
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.