Does not work with factory water oil heat transfer unit on the block
RB26 Heat Tube Kit
1x Steel Zinc Plated Press fitting, This is to be fitted into thermostat housing ( The original 90 degree fitting must be removed )
1x 19mm Hose
2x Hose Clamps
1x Barb Fitting which suits the heater tube outlet end size.
1x M6 Vibration Damper to be fitted to rear of RB26 Block
2x M6 Flange Nuts
R32 have 16mm heater hoses
r33 & R34 Have 19mm heater hoses
